The FALK 1100 TR3+ PD sandwich panel is a quick and high-quality solution for flat roofs. Seal up to 27.5 m2 in a single crane operation!
The FALK 1100 TR3+ PD is a prefabricated insulated flat roof panel with a three-crown profile and a working width of 1100mm. Thanks to the maximum length of 25 metres, you can seal your roof in a flash with the FALK 1100 TR3+ PD insulated roofing sheets!
Upon request, we can also deliver the panels to your construction site in such a way that they do not need to be rotated before installation – speeding up the assembly process for you.
From core thicknesses above 100mm, the FALK 1000 TR3+ PD is connected using tongue-and-groove joints, which makes it easier to install and improves airtightness.
This prefabricated flat roof panel is finished with a light-coloured EPDM or PVC roofing membrane. So, unlike traditional roof installation systems, your roof is completely wind and watertight with just two layers! This innovative and efficient system is becoming increasingly popular: it is applied on large utility buildings and distribution centres as well as offices, verandas and even garden sheds.
This prefabricated flat roof panel is coated on the inside with FALK Off-White (RAL 9002) as standard. But you can also choose another coating and/or colour if you wish. Our sustainable coating, FALK Reflective White, is also gaining in popularity. It can help you save up to 8.9% on your energy bill. This coating reflects up to 85% of light that hits it, which means that fewer light sources need to be installed in a room. Also, by making the most of natural daylight, significant savings can be made on energy costs and carbon emissions.
Configure your panel
Choose the panel width and color
|Core thickness [mm]||Total height [mm]||U-value [m²K/W]||Weight [kg/m²]||Fire class|
* B-s1,d0 available on request
|Working width||1100 mm|
|Center-to-center distance||367 mm|
|Profile height||30 mm|
|Insulation||PIR-insulation (CradleCore® available upon request)|
|Cutback||Available with cutback (max. 300 mm)|
|Installation direction||Left-hand and right-hand version available|
Outside: Polyester 25 mu (other coatings upon request)
|Warranties||FALK Panel warranty & Confidex® warranty (if applicable)|
|Steel thickness||Outside: 0.6 mm
Inside: 0.6 mm
|Minimum lenght||2.500 mm (shorter upon request)|
|Maximum length||25.000 mm|
|Sound insulation||Approximately 27 dB(A)|
|Company certificates||BES 6001, ISO 9001, ISO 14001|
Yes! Use our FALKULATOR to calculate the exact span of your project. If you need advice on mounting solar panels on sandwich panels, get in touch! We would be more than happy to talk you through your options.
With a FALK flat roof panel, you can seal and insulate 25m2 of roof in a single crane operation. Simply apply a light-coloured EPDM or PVC membrane and you have a wind and watertight flat roof. A traditional roofing system often consists of four or more layers.
"The standard interior coating for flat roof panels is FALK Off-White. As the panels are manufactured at FALK, you can choose from a wide range of coatings and colours. A popular alternative to FALK Off-White is FALK Reflective White, a reflective traffic white coating that helps save energy. This coating reflects up to 85% of light, so light can be used intelligently in the building: fewer light sources are needed than with a normal coating, which reduces energy costs and cuts down on carbon emissions. Find out more about FALK Reflective White here.
For a more industrial look, you can also go for a darker coating. For example, a FALK Black Matt coating was chosen for this shed. This gives the building a completely different character.
All coatings and colours are therefore available on request. Get in touch to find out about the possibilities!"
Here are some quick links to help you get all the information you need.
Get in touch to discuss your project!
Your selected items are (0)
There are currently no downloads here.