The new showroom of RhijnArt Keukens is located in Kesteren, Gelderland. The company supplies luxury custom-made kitchens for both companies and private individuals. This project was all about the aesthetics and the finish. FALK took the façade of the new showroom to the next level by supplying the FALK 1060 WB insulated wall panel in the colour HPS Raven.
Year of construction
The building, which has a gross floor area of around 1,850m2, was built on a site that had previously been occupied by a tree nursery. The municipality therefore requested that the building look like a traditional tree house. The building was constructed using FALK sandwich panels and is embellished with anthracite-coloured brickwork, glasswork and aluminium composite frames. The sandwich panels are covered with horizontal and vertical slats, supplied by MontageMarkt in Ede. The original plan was to use wood, but due to shortages, steel was chosen. In order to preserve the natural look, a special wood-look coating was chosen, FALK Special Natural Beech. This fulfilled RhijnArt Keukens’s request for a low-maintenance product that would not age. The FALK 1140 KV carrier panel was used for mounting the standing seam roof.
Jan van Harberden, owner of RhijnArt Keukens: ‘A sleek, modern building on the inside, with a robust, natural look on the outside. We were excited about the exterior from day one.’
The sleek aluminium composite frames were supplied by COFAC in Ede. COFAC is an expert in designing and manufacturing aluminium composite façade elements. The building was constructed by Bouwbedrijf J.G. Timmer. The FALK sandwich panels, standing seam roof and aluminium composite frames were installed by Gevelstyling by Donkersteeg based in Kootwijkerbroek.
|Year of construction||2022|
|Contractor||Bouwbedrijf J.G. Timmer|
|Installation company||Gevelstyling by Donkersteeg|
|Photographer||Studio Sterk Staal|
FALK 1060 WB
The FALK 1060 WB is the ultimate design solution for any insulated wall. Where good insulation meets a beautiful aesthetic.
A unique and iconic church building realized with FALK sandwich panels. A sustainable building partly due to the green roof used.View project
Dimensio Verpakkingen recently moved into its new premises in Almere, a mega distribution centre spanning 33,000 m².View project
NAP Techniek is a specialist in hydraulic systems. The Nijkerk-based company designs, modifies and installs the most complex hydraulic systems.View project
The use of sandwich panels was a deliberate choice, as they require minimal management and maintenance. FALK 1060 WB insulated wall panels were used in the colour Colorcoat HPS® Raven.View project
This detached house is completely energy neutral and has two floors and a basement. FALK 1100 TR3+ sandwich panels were used for this project.View project
The new showroom of RhijnArt Keukens is located in Kesteren, Gelderland. The company supplies luxury custom-made kitchens for both companies and private individuals.View project
Renovation of the stables in Biddinghuizen. The stables were partly covered with asbestos cladding, which were replaced with FALK 1100 TR3+ panels.View project
For the realisation of this beautiful architectural home in Utrecht, FALK's insulated panels in special colours were used. This is an iconic house that is attracting a lot of attention.View project
Your selected items are (0)
There are currently no downloads here.